|
Model No. |
FIBER-OPTIC PADDLEWHEEL FLOW SENSOR, 1/2" TO 4"
PIPE |
PRICE |
|
FP9000 |
The FP9000
lightspeed paddlewheel flow sensors are ideal for applications
in which the solutions have low viscosity (are water-like) and
low in suspended solids. A patented fiber-optic sensing
technique makes these sensors especially well-suited for
applications in hazardous environments, where the paddlewheel
electronics can be mounted in a non-hazardous location and the
near-infrared light signal can be sent down the optic cable to
the paddlewheel within the hazardous location. This
non-magnetic design tolerates some rust. The P9000 series flow
sensors must be used with the companion installation fitting
and interface Transmitter. |
|
|
FIBER-OPTIC
PADDLEWHEEL FLOW SENSOR |
$225.00 |
|
INSTALLATION FITTINGS - PVC Tee Schedule
80 |
|
FP9005 |
1/2" pipe, flowrange (gpm) 1.0 to 20 |
$80.00 |
|
FP9007 |
3/4" pipe, flowrange (gpm) 1.5 to 30 |
$90.00 |
|
FP9010 |
1" pipe, flowrange (gpm) 2.7to 55 |
$90.00 |
|
FP9012 |
1 1/4" pipe, flowrange (gpm) 4.5 to 90 |
$100.00 |
|
FP9015 |
1 1/2" pipe, flowrange (gpm) 6.2 to 125 |
$100.00 |
|
PVC Saddle
Schedule 80 |
|
FP9020 |
2" pipe, flowrange
(gpm) 10.5 to 20 |
$100.00 |
|
FP9025 |
2 1/2" pipe, flowrange (gpm) 15 to 300 |
$100.00 |
|
FP9030 |
3" pipe, flowrange (gpm) 23 to 300 |
$120.00 |
|
FP9040 |
4" pipe, flowrange (gpm) 39 to 800 |
$140.00 |
|
INTERFACE SIGNAL
CONDITIONER "TRANSMITTER" |
|
FP9P-T |
Fiber-optic to TTL pulse interface, requires
24Vdc |
$155.00 |
|
FP9P-CL |
Fiber-optic to NPN open-collector, requires
24Vdc |
$195.00 |
|
ACCESSORIES |
|
PSU-24B |
115 Vac adapter, 24 Vdc output on screw
terminals |
$40.00 |
|
TX4-100 |
4-wire shielded cable, 100 ft. |
$28.50 |
